{"id":9064,"date":"2023-06-26T09:59:43","date_gmt":"2023-06-26T07:59:43","guid":{"rendered":"https:\/\/v2.vision-tools.com\/?p=9064"},"modified":"2025-04-10T12:21:20","modified_gmt":"2025-04-10T10:21:20","slug":"cyclospotter","status":"publish","type":"post","link":"https:\/\/www.vision-tools.com\/en\/products\/cameras\/cyclospotter.html","title":{"rendered":"Cyclospotter"},"content":{"rendered":"\n
\n
\"banner\"\/<\/figure>\n\n\n\n
\n
Start<\/a> > Products<\/a> > Cameras<\/a> > Cyclospotter<\/h6>\n\n\n\n

Cyclospotter<\/h1>\n\n\n\n

Inline Quality Control of Adhesive Beads<\/h2>\n<\/div>\n\n\n\n
<\/div>\n\n\n\n
\n
\n
\n

Quality check of adhesive seam and sealant directly during application<\/h1>\n\n\n\n

The compact 3CCD camera head with RGB LED technology was specially developed for checking sealants and adhesive seams directly during application.<\/p>\n\n\n\n

Following a signal directly from the robot or dispenser for each adhesive section, images are continuously acquised at short intervals until the end of the section is signalled. The simultaneous acquisition of three images, each from different perspectives, means that no reorientation of the component is required when direction changes occur during application.<\/p>\n\n\n\n

In parallel to the acquisition and transmission of the images via Gigabit Ethernet to the computer, the images are evaluated with the VisionTools V60 software.<\/p>\n\n\n\n

Inspection features are interruptions, thickening, constrictions and faulty positions of the sealing. In addition to displaying the images and inspection results, faulty inspection areas are shown in an overview.<\/p>\n\n\n\n

Thanks to the freely selectable colour setting of the RGB LEDs, perfect contrast is also achieved for application material used in different colours.<\/p>\n\n\n\n

<\/div>\n\n\n\n
\"Cyclospotter<\/figure>\n\n\n\n
<\/div>\n\n\n
\n